ANTENNA

LABORATORY

ES   EN

ANTENNA

LABORATORY

ES   EN

PUBLICACIONES

Publicaciones en Revistas Indexadas (Desde 2019)

 
  1. J.M. Poyanco, R. Gómez Alcalá, F. Pizarro, E. Rajo-Iglesias, J.M. Gil, J. Rubio, «2D FEM-Based Simulation and Optimization of Concentric Ring GRIN Lens Antennas,» IEEE Antennas and Wireless Propagation Letters, 2024, DOI: 10.1109/LAWP.2024.3489426 (Accepted).
  2. J.A. Ardila-Rey, D. Figueroa Karmelic, F. Pizarro, S. Govindarajan, B. Albuquerque de Castro, R. Schurch, «Bioinspired Ultrahigh Frequency Antenna for Partial Discharge Detection in High-Voltage Equipment,» IEEE Transactions on Instrumentation and Measurement, vol. 73, pp. 1-18, 2024, Art. no. 6007318, DOI: 10.1109/TIM.2024.3421437.
  3. J. Castro, D. Vasquez, S. Bruna, M. Rodriguez, F. Pizarro, «On the use of low-cost metallic filaments for the implementation of millimeter wave antennas,» 3D Printing and Additive Manufacturing, 2024, DOI: 10.1089/3dp.2023.0128 (Accepted).
  4. F.P. Mena, D. Valenzuela, C. Espinoza, F. Pizarro, B.-K. Tan, D.J. Thoen, J.J.A. Baselmans, R. Finger, «Modeling and Testing Superconducting Artificial CPW Lines Suitable for Parametric Amplification,» IEEE Transactions on Applied Superconductivity, vol. 34, no. 6, pp. 1-8, Sept. 2024, Art. no. 3500808, DOI: 10.1109/TASC.2024.3389652.
  5. S. Diaz, M. Diaz, E. Rajo-Iglesias, F. Pizarro, «3-D-Printed High-Gain Multisection DRA With Symmetric Radiation Pattern,» IEEE Antennas and Wireless Propagation Letters, vol. 23, no. 5, pp. 1458-1462, 2024, DOI: 10.1109/LAWP.2024.3358921.
  6. J.-M. Poyanco, F. Pizarro, E. Rajo-Iglesias, «3D-printed Integrated GRIN Lens-Polarizer Using Anisotropic Materials,» IEEE Transactions on Antennas and Propagation, vol. 72, no. 6, pp. 5343-5348, 2024, DOI: 10.1109/TAP.2023.3329959.
  7. R. Salazar, D. Vasquez, G. Hermosilla, E. Rajo-Iglesias, F. Pizarro, «High-frequency parametric study of electroplated conductive filaments in 3D-printed microwave topologies,» 3D Printing and Additive Manufacturing, 2024, DOI: 10.1089/3dp.2023.0074 (Accepted).
  8. Y. Zarate, F. Torres, M. Rodriguez, F. Pizarro, «3D-printed low-cost choke corrugated Gaussian profile horn antenna for Ka-band,» Scientific Reports, 2023, DOI: 10.1038/s41598-023-50174-5.
  9. S. Diaz, M. Diaz, E. Rajo-Iglesias, F. Pizarro, «Circular Polarized 3D-printed Cylindrical DRA Using Parasitic Dielectric Helix,» Scientific Reports, 2023, DOI: 10.1038/s41598-023-39098-2.
  10. O.A. Restrepo, F.I. Lucero, G. Chaparro, R. Rodriguez, F. Pizarro, R. Bustos, M. Diaz, F.P. Mena, «Optimization of Antenna Performance for Global 21-cm Observations and Verification Using Scaled Copies,» Journal of Astronomical Instrumentation, 2023, DOI: 10.1142/S2251171723500058.
  11. T. Lira-Valdez, E. Rajo-Iglesias, F. Pizarro, «3D-printed Spiral Leaky Wave Antenna with Circular Polarization,» IEEE Open Journal of Antennas and Propagation, vol. 4, pp. 427-433, 2023, DOI: 10.1109/OJAP.2023.3264739.
  12. N. Castro, F. Pizarro, E. Rajo-Iglesias, «High gain low profile horn array with circular polarization using a 3D printed anisotropic dielectric composite material at 38 GHz,» Scientific Reports, vol. 12, 18944, 2022, DOI: 10.1038/s41598-022-23441-0.
  13. P. Stuardo, F. Pizarro, E. Rajo-Iglesias, «Fully 3D-printed spring metasurface loaded with dielectric substrate,» AEU – International Journal of Electronics and Communications, vol. 151, 154224, 2022, DOI: 10.1016/j.aeue.2022.154224.
  14. R. Salazar, F. Pizarro, D. Vasquez, E. Rajo-Iglesias, «Assessment of 3D-printed Waveguides Using Conductive Filaments and a Chloroform-based Smoothing Process,» Additive Manufacturing, vol. 51, pp. 102593, 2022, DOI: 10.1016/j.addma.2022.102593.
  15. J.M. Poyanco, F. Pizarro, E. Rajo-Iglesias, «Cost-effective wideband dielectric planar lens antenna for millimeter wave applications,» Scientific Reports, vol. 12, 4204, 2022, DOI: 10.1038/s41598-022-07911-z.
  16. F. Pizarro, P. Stuardo, R. Olivares, E. Rajo-Iglesias, «Potential use of cold plasma discharges for frequency reconfigurability in a Sievenpiper mushroom metasurface,» Applied Sciences, vol. 11, 11342, 2021, DOI: 10.3390/app112311342.
  17. D. Monasterio, N. Castro, J. Pizarro, F. Pizarro, F.P. Mena, «A Mode-Suppressing Metasurface for Large-Width MMICs Suitable for Tightly-Packaged Millimeter and Submillimeter Heterodyne Receivers,» IEEE Transactions on Terahertz Science and Technology, vol. 11, no. 6, pp. 712-715, 2021, DOI: 10.1109/TTHZ.2021.3105580.
  18. J.-M. Poyanco, O. Zetterstrom, P. Castillo-Tapia, N.J.G. Fonseca, F. Pizarro, O. Quevedo-Teruel, «Two-Dimensional Glide-Symmetric Dielectric Structures for Planar Graded-Index Lens Antenna,» IEEE Antennas and Wireless Propagation Letters, vol. 20, no. 11, pp. 2171-2175, 2021, DOI: 10.1109/LAWP.2021.3092169.
  19. M. Cuevas, F. Pizarro, A. Leiva, G. Hermosilla, D. Yunge, «Parametric Study of a Fully 3D-Printed Dielectric Resonator Antenna Loaded with a Metallic Cap,» IEEE Access, 2021, DOI: 10.1109/ACCESS.2021.3081068.
  20. J.-M. Poyanco, F. Pizarro, E. Rajo-Iglesias, «Wideband Hyperbolic Flat Lens in the Ka-band Based on 3D-printing and Transformation Optics,» Applied Physics Letters, vol. 118, issue 12, p.123503, 2021, DOI: 10.1063/5.0045862.
  21. N. Castro, F. Pizarro, L. Herrán-Ontanón, E. Rajo-Iglesias, «Evaluation of Inverted Microstrip Gap Waveguide Bandpass Filters for Ka-band,» AEU – International Journal of Electronics and Communications, vol. 134, p. 153677, 2021, DOI: 10.1016/j.aeue.2021.153677.
  22. M. Rojas, N. Raveu, F. Pizarro, «Sensitivity Analysis of Rectangular Waveguides with Different Anisotropic Surface Impedance Boundaries Using Modal Extended Theory,» AEU – International Journal of Electronics and Communications, vol. 129, 153555, 2021, DOI: 10.1016/j.aeue.2020.153555.
  23. F. Pizarro, C. Sánchez-Cabello, J. Vazquez-Roy, E. Rajo-Iglesias, «Considerations of impedance sensitivity and losses in designing inverted microstrip gap waveguides,» AEU – International Journal of Electronics and Communications, vol. 124, 153353, 2020, DOI: 10.1016/j.aeue.2020.153353.
  24. J.-M. Poyanco, F. Pizarro, E. Rajo-Iglesias, «3D-Printing for Transformation Optics in Electromagnetic High-Frequency Lens Applications,» Materials, vol. 13, 2700, 2020, DOI: 10.3390/ma13122700.
  25. P. Stuardo, F. Pizarro, E. Rajo-Iglesias, «3D-Printed Sievenpiper Metasurface Using Conductive Filaments,» Materials, vol. 13, 2614, 2020, DOI: 10.3390/ma13112614.
  26. F. Pizarro, D. Ramírez-Gil, A. Algaba-Brazález, L. Herrán-Ontanón, E. Rajo-Iglesias, «Comparison study of 4×4 Butler matrices in microstrip technologies for Ka-band,» AEU – International Journal of Electronics and Communications, vol. 122, p. 153248, 2020, DOI: 10.1016/j.aeue.2020.153248.
  27. F. Pizarro, R. Salazar, E. Rajo-Iglesias, M. Rodríguez, S. Fingerhuth, G. Hermosilla, «Parametric Study of 3D Additive Printing Parameters Using Conductive Filaments on Microwave Topologies,» IEEE Access, vol. 7, pp. 106814-106823, 2019, DOI: 10.1109/ACCESS.2019.2932912.
  28. N. Memeletzoglou, C. Sánchez, F. Pizarro, E. Rajo-Iglesias, «Analysis of Periodic Structures Made of Pins Inside a Parallel Plate Waveguide,» Symmetry, 2019, DOI: 10.3390/sym11040582</a

Patentes
J. Castro,  M. Valdivia, M. Sottovia, F. Pizarro, D. Vasquez “Una composición de resina fotocurable para impresión 3D”, num. 202400855, Chile (PAF)